TM 9-2350-222-20-1-5
GAS PARTICULATE TUBES AND HOSES REPLACEMENT (Sheet 5 of 7)
INSTALLATION:
NOTE
Traverse turret as necessary to
accomplish installation.
1.
Using flat-tip screwdriver, install clamps (A) onto tube (B).
Position new gasket (C) and tube (B) to slipring (D).
2
Using 7/16 inch wrench and socket, install four screws and new lockwashers (E) to secure tube (B)
3.
and gasket (C) to slipring (D).
4.
Slip clamp (A) over tube (B) onto retaining strap.
5.
Using flat-tip screwdriver, secure clamp (A) to retaining strap.
6.
Slip clamps (F) and (G) onto hoses (H) and (J).
7.
Install hoses (H) and (J) onto tube (B).
Using flat-tip screwdriver, slide clamps (F) and (G) over hoses (H) and (J) and tube (B) and tighten
8.
clamp.
Go on to Sheet 6
TA253779
