TM 9-2350-222-20-1-5
INTERIOR RELEASE MECHANISM MOUNTING BRACKET REPLACEMENT (EARLY MODEL)
(Sheet 1 of 2)
TOOLS:
7/16 in. socket with 1/2 in. drive
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
7/16 in. combination box and open end wrench
SUPPLIES:
Lockwasher (MS35338-44) (2 required)
PRELIMINARY PROCEDURE:
Remove interior release mechanism (page 21-14)
REMOVAL:
1.
Using 7/16 inch socket and wrench, re-
move two nuts (A), lockwashers (B), flat
washers (C), and screws (D). Throw lock-
washers away.
2.
Remove mounting bracket (E).
Go on to Sheet 2
TA253896
