TM 9-2350-222-20-1-5
lNTERlOR RELEASE MECHANISM MOUNTING BRACKET REPLACEMENT (LATE MODEL) (Sheet
2 of 2)
INSTALLATION:
1.
Place mounting bracket (A) onto bracket (B).
2.
Insert two screws (C), flat washers (D), new
lockwashers (E), and nuts (F) into bracket (B).
3.
Using 7/16 inch socket and wrench.
tighten nuts (F) and screws (C).
4.
Install interior release mechanism (page 21-15).
End of Task
TA253899
