TM 9-2350-222-20-1-5
EXTERIOR RELEASE HANDLE CONTROL ASSEMBLY REPLACEMENT (Sheet 2 of 5)
NOTE
On early model, perform steps
EARLY
1 and 2 and continue with
MODEL
step 3. On late models start
with step 2.1.
1.
Using screwdriver, remove screws (A)
securing clamps (B).
Remove clamps (B).
2.
2.1. Using socket head screw key, loosen four
screws (A) securing clamps (B) to cables (C).
LATE
MODEL
2.2. Remove cables (C) from clamps (B).
3.
Full cable (C) from control housing (D).
4.
Using two 9/16 inch wrenches, remove nut
(E) securing control housing (D) to bracket (F).
Remove control housing (D) from bracket (F).
5.
6.
Using 9/16 inch wrench, remove nut (G)
from control housing (D).
NOTE
Bracket (F) rotatad 900 to show instal-
lation of nuts (E) and (G) and control
housing (D).
TA253889