TM 9-2350-222-20-1-5
TACHOMETER REAR FLEXIBLE SHAFT REPLACEMENT (LATE MODEL) (Sheet 5 of 5)
INSTALLATION:
1.
Place rear flexible shaft (A) into engine compartment area and attach wire to bulkhead adapter end of
shaft (A).
2.
Pull wire into turret compartment until rear flexible shaft (A) is accessible through side bulkhead
opening.
3.
Detach wire from end of rear flexible shaft.
4.
Using 3/4 inch wrench, connect rear flexible shaft (A)
to bulkhead adapter (B).
Install clamp (C) onto rear flexible shaft (A).
Using 7/16 inch wrench, secure clamp (C) to
hull with screw and new lockwasher (D).
7.
Install left side bulkhead cover (page 16-34).
Install 2A powerplant (page 5-14) or 2D
8.
powerplant (page 5-37).
9.
Start engine and check that tachometer oper-
ates (TM 9-2350-222-10).
TA253887
End of Task
