TM 9-2350-222-20-1-5
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Inspection
Installation
TOOLS:
Slip-joint pliers
12 in. adjustable wrench
15/16 in. open end wrench
1 in. open end wrench
9/16 in. combination box and open end wrench
7/16 in. combination box and open end wrench
1-1/8 in. combination box and open end wrench
Ratchet with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
1/2 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Cotter pin (MS 24665-132)
SUPPLIES:
Gasket (11684281)
Lockwasher (MS 35338-46) (4 required)
PERSONNEL: TWO
PRELIMINARY PROCEDURES: Remove engine shroud (page 9-2).
Remove air intake left side only (page 7-82).
Go on to Sheet 2
TA253851
