TM 9-2350-222-20-1-5
BILGE PUMP REPLACEMENT (Sheet 2 of 6)
Remove hose clamps (D) and (G) from hose (E).
9.
NOTE
If screws (H) were removed in
step 4, go to step 11.
10.
Using 9/16 inch wrench, remove two
screws and lockwashers (H) from elbow (J).
Throw lockwashers away.
11.
Remove elbow (J) from tank.
Remove gasket (K) from elbow (J). Throw
12.
gasket (K) away.
13.
Using screwdriver, loosen clamp (L) on
valve (M).
14.
Remove valve (M) from elbow (J).
15.
Remove clamp (L) from valve (M).
16.
Using 1/2 inch wrench, remove three
screws (N) and lockwashers (P) from bilge
pump assembly (C). Throw lockwashers
away.
17.
Lift bilge pump assembly (C) off screen (Q).
18.
Remove screen (Q) and lockwashers (R)
from bilge pump mounting pads (S).
Throw lockwashers away.
Go on to Sheet 3
TA253846
19.1-3
