TM 9-2350-222-20-1-5
RIGHT ANGLE DRIVE, CLUTCH, AND PUMP REPLACEMENT (Sheet 4 of 8)
14.
Using pry bar, loosen right angle drive (A) from transmission.
NOTE
It may be necessary to loosen spacer (P) to disengage right
angle drive from transmission.
Pull right angle drive (A) away from transmission to release it from drive sprocket.
15.
16.
Raise lifting device and remove right angle drive (A) and its attached components from vehicle
and place on work bench. Remove lifting device and sling.
17.
Remove and throw away gaskets (Q) and packing (R).
18.
Using rags, wipe suction hose end and hose end in vehicle clean and tape them with masking tape
19.
TA141205
18-103