TM 9-2350-222-20-1-5
REAR FLUID FILTER TUBE ASSEMBLY REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1.
Place rags under elbow (A) to catch hydraulic
fluid.
2.
Using wrench, remove nut (B) from elbow (C).
3.
Using wrench, remove nut (D) from elbow (A)
while holding elbow (A) with automotive
wrench.
4.
Using socket, remove screw and lockwasher (E)
from clamp (F), taking care to be sure clamp (F)
does not fall into hull. Throw lockwasher away.
5.
Remove tube (G) from vehicle.
6.
Cover elbows (A) and (C) with rags.
CLEANING AND INSPECTION:
1.
Using rags and dry cleaning solvent (Item 54,
2.
Inspect for damage.
3.
Replace damaged parts.
Go on to Sheet 3
TA141170
