TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR LINE FLUID FILTER ELEMENT REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1.
Place rags under filter (A) to catch oil
drippings.
2.
Using pliers, cut lockwire (B). Remove lockwire
from filter (A).
Using 1-1/2 inch wrench on nut of tube (C),
3.
remove tube (C) from filter housing (A).
4.
Remove filter element (D) from tube (C).
NOTE
It may be necessary to remove
spring located in filter housing (A)
to remove preformed packings and
backup rings.
5.
Remove preformed packing (E) from filter
element (D).
Remove preformed packing (F) from filter
6.
housing (A).
Remove two backup rings (G) from filter
7.
element (D).
Throw away items (D), (E), (F), and (G).
8.
CLEANING AND INSPECTION:
1.
Using dry cleaning solvent (Item 54, Appendix
D) and rags, clean out filter tube.
2.
Inspect tube and housing for damaged threads.
3.
Remove damaged parts.
Go on to Sheet 3
TA141167
18-65