TM 9-2350-222-20-1-5
HYDRAULIC SELECTOR CONTROL VALVE REPLACEMENT (Sheet 2 of 8)
Using 9/16 inch socket, remove screw and
lockwasher (A) from clamp (B) making sure
clamp (B) does not fall into hull. Throw
lockwasher away.
2.
Using 1-1/2 inch wrench on nut (C), remove nut
(C) from elbow (D).
3.
Using 1-1/2 inch wrench on nut (E), remove nut
(E) from elbow (F).
4.
Using 1-1/2 inch wrench on nut (G), remove nut
(G) from union (H).
5.
Using 1-5/8 inch wrench on nut (J), loosen nut
(J).
NOTE
It may be necessary to loosen
t h r e e screws on filter (L) to
remove tube (K) from elbow (F).
Use
7/16
inch
wrench,
if
necessary.
6.
Remove tube (K) from elbow (F) and union (H).
7.
8.
9.
10.
TA141173