TM 9-2350-222-20-1-5
BULLDOZER BLADE ASSEMBLY REPLACEMENT (Sheet 1 of 11)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
-.
12 ton jack
TOOLS: Crowbar
1 in. dia. brass punch
15/16 in. socket with 3/4 in. drive
10 lb. sledge hammer
1-1/2 in. socket with 3/4 in. drive
Handle extension (cheater bar)
1-1/2 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
Hinged socket wrench handle (breaker
15/16 in. combination box and
bar) with 3/4 in. drive
open end wrench
SUPPLIES: Lockwashers (MS35338-53) (4 required)
Lockwashers (MS35335-39) (14 required)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURES: Park vehicle on level ground and set parking brake
(TM 9-2350-222-10)
Remove moldboard cutting edge (page 18-6)
NOTE
Replacement procedures for both right and left pushbeams,
arms, rams, and cable assemblies are the same.
Go on to Sheet 2
TA141111
