TM 9-2350-222-20-1-5
BULLDOZER BLADE ASSEMBLY REPLACEMENT (Sheet 5 of 11)
NOTE
Outer tilt arms must be removed
before inner tilt arm pin can be
taken off.
20.
Using 15/16 inch socket, remove screw,
lockwasher, and lock (T). Throw lockwasher
away.
21.
Remove pin (U) and remove outer tilt arm (C)
from moldboard.
22.
Using 15/16 inch socket, remove screw,
lockwasher, and lock (V). Throw lockwasher
away.
Slide pin (W) out of brackets (X), through
23.
brackets (Y), and off moldboard. Remove inner
tilt arm (F) from moldboard.
24.
Using 15/16 inch socket, remove screws,
lockwashers, and locks (Z) and (AA). Throw
lockwashers away.
Remove pins (AB) and (AC). Remove pushbeam
(R) from moldboard.
26.
Remove emergency lift cables from moldboard
TA141115
18-13
