TM 9-2350-222-20-1-5
DRIVER'S SEAT REPAIR (Sheet 2 of 5)
WARNING
Exercise care when removing pin, because of spring tension.
5.
Using pliers, remove two cotter pins (G) from two straight pins (H). Remove two straight pins (H).
Throw cotter pins away.
6.
Remove bracket (J), lever (K), pin (L), flat washer (M), and spring (N).
7.
Using pliers, remove cotter pin (P) from pin (Q).
Throw cotter pin away.
8.
Remove pin (Q), lever assembly (R), and tube (S)
from seat support (F). -
INSPECTION:
1.
Inspect all parts for wear or damage.
2.
Replace all worn or damaged parts.
ASSEMBLY:
Aline tube (A), spring (B), washer (C), and pin
1
(D).
2.
Install pin (E) through lever assembly (F) and
tube (A).
3.
Using pliers, install new cotter pin (G) in pin
(E).
Go on to Sheet 3
TA139248
