TM 9-2350-222-20-1-5
DRIVER'S SEAT AND BACKREST REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Position seat assembly (A) on housing (B).
NOTE
Make sure hole in seat assembly
and housing are alined.
2.
Using hammer and drive pin, install rod (C).
3.
Using retaining ring pliers, install new split
washer (D).
Reposition driver's seat (TM 9-2350-222-10).
4.
5.
Using slip joint pliers, install spring (E).
Position backrest assembly (F) in bracket (G).
6.
End of Task
TA139244
