TM 9-2350-222-20-1-5
DRIVER'S SEAT REPAIR (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Inspection
Assembly
TOOLS: 9/16 in. combination box and open end wrench
Slip joint pliers
Flat-tip screwdriver
Vise
Diagonal cutting pliers
Ratchet with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
SUPPLIES: Cotter pins (MS24665-283) (3 required)
Wire (Item 59, Appendix D)
PERSONNEL: Two
Remove driver's seat assembly (page 17-41)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
Using fingers, remove hooks on cushion (A)
1.
from eyes on cushion (A).
Remove cushion (A) from seat (B).
2.
3.
Using wrench and socket, remove four screws
(C), washers (D), and nuts (E).
Remove seat support (F) from seat (B).
4.
Go on to Sheet 2
TA139247
