TM 9-2350-222-20-1-5
DRIVER'S SEAT AND BACKREST REPLACEMENT (Sheet 2 of 3)
REMOVAL:
Remove back assembly (A).
1.
Using slip joint pliers, remove spring (B).
2.
3.
Using retaining ring pliers, remove split washer (C) from forward end of rod (D). Throw washer
away.
Dump driver's seat (TM 9-2350-222-10).
4.
Using hamrner and drive punch, drive rod (D) toward rear of vehicle until clear of seat assembly
5.
(E).
6.
Remove seat assembly (E).
INSPECTION:
1.
Inspect all parts for damage or wear.
2.
Replace parts as required.
3.
Clean and lube parts as required.
Go on to Sheet 3
TA139243
