TM 9-2350-222-20-1-5
DRIVER'S PERISCOPE BOX ASSEMBLY REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
NOTE
If mounting brackets (A) were not removed, go to step 2.
Install two mounting brackets (A) on hull mounts using screws (B), four flat washers (C), two new
1.
lockwashers (D), and two nuts (E).
Attach periscope box (F) to mounting brackets (A) with two screws (B), four flat washers (C), two
2.
new lockwashers (D), and two nuts as shown.
Using socket and wrench, position periscope box and tighten screws (B).
3.
End of Task
TA139219
