TM 9-2350-222-20-1-5
DRIVER'S INSTRUCTION PLATE REPLACEMENT (Sheet 1 of 1)
TOOLS: 1 lb. hammer
1/8 in. drift punch
Vise
SUPPLIES: Round head drive screws (MS21318-23) 4 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Secure bracket in vise and, using hammer and drift punch from the rear, remove four round head
drive screws (A) holding instruction plate (B) to bracket (C). Throw screws away.
2.
Remove instruction plate (B) from bracket (C).
INSTALLATION:
1.
Using hammer, install instruction plate (B) to
bracket (C), with four new round head drive
screws (A).
2.
Remove bracket (C) from vise. Install plate and
End of Task
TA139217