TM 9-2350-222-20-1-5
DRIVER'S HATCH TORSION BAR ANCHOR ADJUSTMENT (Sheet 1 of 6)
TOOLS: 3/4 in. combination box and
Drop light
open end wrench
3/4 in. socket with 1/2 in. drive
1 in. socket with 3/4 in. drive
2 in. extension with 1/2 in. drive
7/8 in. socket with 3/4 in. drive
8 in. extension with 3/4 in. drive
9/16 in. combination box and
open end wrench
Hinged socket wrench handle with 3/4 in. drive
Pull scale
SPECIAL TOOLS:
Hatch torque adapter (Item 36, Chapter 3, Section I)
SUPPLIES: Pencil
Pipe extension 24 in. long
Lockwasher
PERSONNEL: Two
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURE:
Lock driver's hatch (TM 9-2350-222-10)
Position gun tube over rear deck; engage turret lock
ADJUSTMENT:
(TM 9-2350-222-10).
1.
Locate one person in driver's station, other person in turret.
2.
Using pencil, scribe a mark showing position of anchor (A) to housing (B) for purpose of
installation.
Change 4