TM 9-2350-222-20-1-5
OUTRIGGER SUPPORT NO. 4 (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS:
Ratchet with 1/2 in. drive
1-1/8 in. socket with 1/2 in. drive
Hinged handle with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
3/4 in. combination box and open end wrench
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237
SUPPLIES:
Lockwashers (MS35338-81) (4 required)
Locking compound (Item 15, Appendix D)
Remove rear fender stowage box (page 16-185)
PRELIMINARY PROCEDURES:
Remove fender extension (page 16-72)
Remove air cleaner (side loading, page 7-88, or top loading, page
7-94)
REMOVAL:
Left No. 4 outrigger support is shown; right No. 4 outrigger
support replacement is similar.
1.
Using 9/16 inch socket, remove screw (A) and flat washer (B) holding extension bracket (C) to bottom
flange of No. 4 outrigger support (D).
Go on to Sheet 2
TA253569
Change 1 16-61
