TM 9-2350-222-20-1-4
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ENGINE COMPARTMENT)
(Sheet 1 of 15)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Inspection
Installation
TOOLS: 9/16 in. combination box and open end wrench (2 required)
7/16 in. socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
10 in. extension with 1/2 in. drive
Long round nose pliers
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N.m)
7/16 in. combination box and open end wrench
8 in. adjustable wrench
15/ 16 in. combination box and open end wrench (2 required)
7/8 in. combination box and open end wrench
6 in. steel rule
SUPPLIES: Cotter pin (MS24665-283 (3 required)
Gasket (10911888)
Preformed packing (MS28775-110)
Packing with retainer (11659173-2)
Pencil
Writing paper
Lockwasher (MS35338-63) (3 required)
Lockwasher (MS35338-44) (10 required)
Cotter pin (MS24665-138)
Preformed packing (11602168-1)
PRELIMINARY PROCEDURE: Remove powerplant (page 5-1)
Go on to Sheet 2
TA140390
13-84
