TM 9-2350-222-20-1-4
BRAKE RIGHT HAND SLAVE CYLINDER AND TUBE ASSEMBLY REPLACEMENT
(Sheet 1 of 6)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS: Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
11/16 in. combination box and open end wrench
Putty knife
Torque wrench with 1/2 in. drive
13/16 in. combination box and open end wrench
SUPPLIES: Container
Gasket (AN901-6C) (2 required)
Preformed packing (MS28775-222)
1/2 in. plastic cap
1/2 in. plastic plug
Masking tape (Item 57, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Rags
Lockwasher (MS35338-44)
Lockwasher (MS35338-46)
REFERENCE: TM 9-2350-222-10
Remove powerplant (page 5-1)
PRELIMINARY
PROCEDURE:
REMOVAL:
NOTE
Clean all parts and general area prior to removal.
13-64
