TM 9-2350-222-20-1-4
BRAKE LEFT HAND SLAVE CYLINDER AND TUBE ASSEMBLY REPLACEMENT
(Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS: 9/16 in. socket with 1/2 in. drive
Putty knife
11/ 16 in. combination box and open end wrench
13/16 in. combination box and open end wrench
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES: Container
1/2 in. plastic cap
Gasket (AN901-6C) (2 required)
Lint-free cloth (Item 12, Appendix D)
1/2 in. plastic plug
Masking tape (Item 57, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Preformed packing (MS28775-222)
REFERENCE: TM 9-2350-222-10
Remove powerplant (page 5-1)
PRELIMINARY PROCEDURE:
REMOVAL:
NOTE
Clean all parts and general area prior to removal.
Go on to Sheet 2
TA140367
13-60
