TM 9-2350-222-20-1-4
BRAKE MASTER CYLINDER MOUNTING BRACKET AND PUSH ROD REPLACEMENT
(Sheet 3 of 7)
Push lip of boot (P) loose from bracket (A).
10.
Remove assembled items (Q) from bracket (A).
11.
NOTE
Clevis (M) and nut (R) have left
hand threads. Push rod (S) and
nut (T) have right hand threads.
12. Using 13/16 inch wrench on clevis (M) and
11/ 16 inch wrench on nut (R), loosen clevis.
13. Using 5/8 inch wrench on rod (U) and 13/16
inch wrench on clevis (M), remove clevis. If
washer (V) is present, remove and throw away.
14. Using 5/8 inch wrench on rod (U) and 11/16
inch wrench on nut (T), loosen nut.
15. Using one 5/8 inch wrench on rod (U) and
other 5/8 inch wrench on push rod (S), loosen
push rod.
16. Using one 5/8 inch wrench on rod (U) and
other 5/8 inch wrench on push rod (S), remove
push rod. If washer (W) is present, remove and
throw it away.
Go on to Sheet 4
TA140339
13-31