TM 9-2350-222-20-1-4
ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE) (Sheet 4 of 12)
Using spanner wrench, disconnect electrical
17.
connector (V).
Using cross-tip screwdriver and adjustable
18.
wrench, remove four screws, lockwashers, and
nuts (W). Throw lockwashers away.
Remove cable connector (X) from bracket.
19.
Using 1/2 inch socket, remove screw and
lockwasher (Y). Throw lockwasher away.
Remove clamp (Z).
Using 1/2 inch socket with extension, remove
nut (AA) securing clamp (hidden).
Remove clamp.
Disconnect electrical connector (AB) from
engine oil pressure switch (AC).
Disconnect electrical connector (AD) from
engine oil pressure transmitter (AE).
Disconnect electrical connector (AF) from
engine oil temperature thermostatic switch
(AG).
27. Disconnect electrical connector (AH) from engine oil temperature transmitter (AJ).
28. Using 7/16 inch socket and wrench, remove three screws, lockwashers, and nuts (AK). Throw
lockwashers away.
29. Remove three clamps (AL).
Go on to Sheet 5
TA139893
10-342
