TM 9-2350-222-20- 1-4
ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE) (Sheet 9 of 12)
14. Place wiring harness (A) in position.
15. Place two clamps (T) in position around
wiring harness (A).
16. Using 1/2 inch socket with extension, install
two screws and new lockwashers (U) securing
two clamps (T) to engine.
17. Using slip joint pliers, install connector (V)
to fuel-water separator control (W).
18.
place two clamps (X) in position around wiring
harness (A).
19.
Using 1/2 inch socket with extension, install
two screws and new Iockwashers (Y) securing
clamps (X) to engine.
20. Using slip joint pliers, install connector (Z) to
fuel solenoid valve (AA).
21. Using 7/8 inch wrench, install fuel shutoff
lead (AB) to front of engine.
22. Place clamp (AC) (hidden) in position on
cable.
23. Using 9/16 inch wrench, install nut securing
cable and clamp (AC).
TA139898
10-347
