TM 9-2350-222-20-1-3
TRANSMISSION SHROUD BRACKET REPAIR (Sheet 1 of 6)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Assembly
TOOLS: Putty knife
Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
Screwdriver, cross-tip, No. 2
Flat-tip screwdriver
SUPPLIES: Dry cleaning solvent (Item 54, Appendix D)
Silicone adhesive (Item 7, Appendix D)
Rags (Item 65, Appendix D)
Lockwasher (MS35338-25) (5 required)
Lockwasher (MS35336-26) (2 required)
Lockwasher (MS35336-27) (7 required)
Remove shroud support (page 9-38)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
Using cross-tip screwdriver, remove four screws
1.
(A) and lockwashers (B) holding retainer (C) to
bracket (D). Throw lockwashers (B) away.
2.
Using flat-tip screwdriver, remove retainer (C),
seal (E), and retainer (F) from bracket (D).
TA140266
Go on to Sheet 2
9-32
