TM 9-2350-222-20-1-3
TRANSMISSION SHROUD REPAIR (Sheet 5 of 6)
ASSEMBLY:
Position insulation (A) on shroud (B).
1.
Using 7/16 inch socket, install retainer (C) to shroud with 25 screws (D) 21 washers (E), and four
2.
new key washers. Be sure to position four key washers properly and bend tabs with chisel and
hammer.
NOTE
Both parts of turnlock fasteners must be pointing in same
direction.
Using 3/4 inch socket and 3/4 inch wrench, install three turnlock fasteners (F) to both sides of
3.
shroud (B). Use new self-locking nuts.
TA140264
Go on to Sheet 6
9-30