TM 9-2350-222-20-1-3
TRANSMISSION SHROUD SUPPORTS (LEFT OR RIGHT) REPLACEMENT (Sheet 1 of 1)
9/16 in. socket with 1/2 in. drive
2 in. extension with 1/2 in. drive
SUPPLIES: Lockwasher (MS35338-46) (3 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Using socket, remove three screws, washers,
away.
2.
Remove supports from vehicle.
INSTALLATION:
Position supports (B) (left or right) on hull wall
1.
bracket and attach supports with three screws,
washers, and new lockwashers (A).
2.
Using socket, tighten three screws, washers,
and lockwashers (A).
3.
TA140272
End of Task
9-38