TM9-2350-222-20-1-3
ACCELERATOR LINKAGE ADJUSTMENT (Sheet 8 of 8)
48. Start engine (TM 9-2350-222-10).
49. Press accelerator pedal down to floor. Tachometer should read between 2550-2650 rpm. If engine
will not accelerate to within 2550-2650 rpm, shut down engine (TM 9-2350-222-10). Go back and do
steps 44 thru 50 to readjust. If engine does accelerate to between 2550-2650 rpm, go to step 51.
50. Stop engine (TM 9-2350-222-10).
51. Install upper engine access cover (page 16-40).
52. Install driver's escape hatch (page 16-134).
53. Remove blocks from track (TM 9-2350-222-10).
End of Task
7-422
