TM9-2350-222-20-1-3
ACCELERATOR PEDAL RETURN SPRING ADJUSTMENT (Sheet 1 of 2)
TOOLS: 7/16 in. combination box and open end wrench
Spring scale
REFERENCE: TM 9-2350-222-10
Place shift lever in P (park) position (TM 9-2350-222-10)
PRELIMINARY PROCEDURES:
Disconnect accelerator linkage at powerplant (page
ADJUSTMENT:
Using spring scale (A), as shown from behind, check pressure required to depress accelerator pedal
1.
(B).
Scale should read between 7 and 8 pounds.
2.
If scale reads more than 8 pounds, perform steps 5 thru 7.
3.
If scale reads less than 7 pounds, perform steps 9 thru 11.
4.
Go on to Sheet 2
TA141451
7-424
