TM9-2360-222-20-1-3
MANIFOLD HEATER FUEL FILTER ELEMENT AND INPUT FUEL LINE REPLACEMENT
(sheet 7 of 8)
Fuel Filter Element Replacement (Sheet 2 of 2)
WARNING
Compressed air used for cleaning purposes will not exceed 30
psi.
Use only with effective chip guarding and personal
protective equipment (goggles/shield, gloves, etc.).
5.
Wipe out bowl (A) and dry with compressed air.
INSTALLATION:
1.
Position new filter element (C) in filter bowl
(A).
2.
Position new preformed packing (B) over lip of
filter bowl (A) and install to filter head (D).
3.
Using wrench, tighten filter bowl (A) to filter
head (D).
4.
Operate primer pump (TM 9-2350-222-10) and
check for leaks. If leak is found, tighten filter
bowl.
5.
Install lower engine access cover (page 16-42).
2A ENGINE
End of Task
TA149111
7-413
