TM9-2350-222-20-1-3
FUEL INLET FLUID PRESSURE FILTER REPLACEMENT (Sheet 2 of 3)
5.
Using 9/16 inch wrench, loosen connector
(D).
6.
Using 9/16 inch wrench, loosen connector
(E).
7.
Using screwdriver, remove two screws (F) and
8.
Remove filter (C) from mounting bracket, thus
disconnecting three lines (H), (J), and (K) from
filter.
9.
Using 1/2 inch wrench, remove adapter (B)
from filter (C),
10, Using adjustable wrench, remove tee
connector (L),
NOTE
Filter (C) may have to be put in
vise for removal of adapter (B)
and tee connector (L).
Go on to Sheet 3
TA149074
7-292