TM9-2360-222-20-1-3
FUEL SHUTOFF CABLE MOUNTING BRACKET REPLACEMENT (EARLY MODEL) (Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
..
TOOLS: 15/16 in. combination box and open end wrench (2 required)
9/16 in. combination box and open end wrench
1/2 in. combination box and open end wrench
7/16 in. socket with 1/2 in. square drive
Ratchet with 1/2 in. square drive
3/32 in. drive punch
Hammer
7/16 inch combination box and open end wrench
SUPPLIES: Pin (MS171525) (2 required)
Lockwasher (MS35335-39) (2 required)
Lockwasher (MS35333-44) (2 required)
REMOVAL:
NOTE
Callouts E, F and D deleted.
1.
Using 9/16 inch wrench and 1/2 inch
wrench, loosen nut (A) and remove handle
assembly (B) from cable (C).
2.
Deleted.
3.
Deleted.
Remove nut (A) from cable (C).
4.
TA253205
Go on to Sheet 2
7-208 Change 1
