TM9-2360-222-20-1-3
FUEL SHUTOFF VALVE, LEVER, LINK, AND BRACKET REPLACEMENT (EARLY MODEL)
(Sheet 7 of 9)
11. Using 1/2 inch socket with extension, install
two screws (K), new lockwashers (L), and flat
washers (M) to hold bracket (N) to hull.
12. Position fuel shutoff valve for installation to
bracket (N).
13. Using 7/16 inch wrench and 7/16 inch socket with extension, install two screws (P) and two new
lockwashers and nuts (Q).
14.
Remove plastic cap from end of hose (R).
Using 1-1/8 inch wrench, install tube nut (S)
15.
to elbow (C).
Go on to Sheet 8
TA253278
Change 1 7-203
