TM9-2360-222-20-1-3
FUEL SHUTOFF CABLE MOUNTING BRACKET REPLACEMENT (EARLY MODEL) (Sheet 3 of 4)
INSTALLATION:
Position bracket (A) and gas particulate air
1.
heater hose bracket (B) to mounting bosses
on reservoir.
2.
Using 7/16 inch socket and 7/16 inch
wrench, secure brackets (A) and (B) to
reservoir with two screws and new
lockwashers (C).
Install grommet (D) in lower hole of bracket
3.
(A).
Thread cable(E) through grommet (D) in lower
4.
hole of mounting bracket (A).
As you thread cable (E) through grommet,
5.
install nut(F) and new lockwasher (G) onto
cable (E) and continue threading cable through
top hole in mounting bracket (A).
6.
Install new lockwasher (H) and nut (J) onto
cable (E).
TA253282
Go on to Sheet 4
7-210 Change 1
