TM9-2360-222-20-1-3
FUEL SHUTOFF HANDLE REPLACEMENT (Sheet 1 of 2)
TOOLS: Vise
1/2 in. combination box and open end wrench
Drive punch
Hammer
Slip joint pliers
9/16 in. combination box and open end wrench
SUPPLIES: Pin (MS171525) (2 required)
REFERENCE: TM 9-2350-222-10
Set ENGINE FUEL SHUTOFF switch to OFF (TM 9-2350-222-10)
PRELIMINARY PROCEDURE:
REMOVAL:
Hold extension (A) with 1/2 inch wrench while loosening jamnut (B) with 9/16 inch wrench.
1.
NOTE
If necessary, grip cable (C) with
p l i e r s to remove handle (D) and
extension (A).
Remove handle (D) and handle extension (A) as
2.
assembly from cable (C).
Using 9/16 inch wrench, remove jamnut (B).
3.
DISASSEMBLY:
1.
Using vise to hold handle (D), drive two pins (E)
out of handle (D) with hammer and drive
punch. Throw pins away.
2. Separate handle (D) from extension (A).
Go on to Sheet 2
TA141591
7-206
