TM9-2350-222-20-1-3
FUEL SHUTOFF VALVE, LEVER, LINK, AND BRACKET REPLACEMENT (EARLY MODEL)
(Sheet 5 of 9)
20. Using 1-1/8 inch wrench, loosen nut (V) about
1/2 turn.
21. Using adjustable wrench, remove elbow (W)
with nut (V), washer (X), and preformed
packing (Y) from fuel shutoff valve as an
assembly.
Manually remove preformed packing (Y) and washer (X) from elbow (W). Throw preformed
22.
packing (Y) away.
23. Using adjustable wrench to hold elbow (W), use 1-1/8 inch wrench to remove nut (V) from elbow
(W).
CLEANING AND INSPECTION:
1.
Using wire brush, clean threads on two elbows.
Inspect parts for damage. Replace as necessary.
2.
INSTALLATION:
1.
Manually install fuel shutoff valve into vise.
2.
Using sealing compound (Item 24, Appendix D),
lightly coat threads (A) on two elbows.
Go on to Sheet 6
TA253276
Change 1 7-201