TM 9-2350-222-20-1-3
OIL FILLER TUBE (UPPER) REPLACEMENT (Sheet 4 of 4)
Place clamp (J) on hose (K) with nut facing you.
8.
Position tube assembly (F) with its assembled
9.
10. Push tube assembly (F) into hose (K).
11. Position clamp (J) over end of hose (K).
12.
(M).
Start two screws (M) through clamps of tube
13.
assembly (F).
Using 1/2 inch socket, tighten two screws (M).
14.
With clamp (J) positioned over end of hose, use
15.
5/16 inch socket and tighten nut of clamp (J).
SCreW
(Q).
Position bracket (N), clamp (P), and
16.
Start nuts (R) on screw (Q).
17.
Using 1/2 inch socket and wrench, tighten nuts
18.
(R).
19.
End of Task
TA139414
6-46