TM 9-2350-222-20-1-3
ENGINE OIL LEVEL GAGE CAP REPLACEMENT (2D ENGINE) (Sheet 2 of 3)
3.
Using socket, remove eight screws and
washers (C).
Open filler cap (D) and remove gage (E) from
inside of cap.
5. Remove front engine access plate (F) and cap
assembly (G) by pulling up on cap (D).
6.
Using socket, remove two screws (H) and lockwashers (J). Throw lockwashers away.
Remove cap assembly (G) and gasket (K) from access plate (F). Throw gasket (K) away.
Go on to Sheet 3
TA139409
6-41