TM 9-2350-222-20-1-3
DRAIN ENGINE OIL (2D ENGINE) (Sheet 2 of 3)
4.
Position container under drain valve opening.
5.
Using ratchet and extension, remove oil drain
plug (F) from engine oil pan (G).
6.
Using 9/16 inch socket with extension, remove
vent bolt (H) and sealing washers (J). Throw
washers away.
7.
Using 3/4 inch socket, loosen oil drain valve
(K) six complete turns.
8.
Allow engine oil to drain into container.
9.
After draining, clean area around drain plug
(F) with rags and, using ratchet and
extension, install drain plug (F) into engine
oil pan (G).
Go on to Sheet 3
TA139420
6-52