TM 9-2360-222-20-1-3
OIL FILLER TUBE (UPPER) REPLACEMENT (Sheet 2 of 4)
3.
Using 1/2 inch socket, remove two screws (D)
and lockwashers (E). Throw lockwashers away.
Using 5/16 inch socket on nut of clamp (F),
4.
loosen clamp.
Slip clamp (F) off hose (G).
5.
6.
Pull tube assembly (H) loose from hose (G) and
remove tube assembly.
Using screwdriver, release spring (J) from
Cap
7.
assembly (K). Remove spring.
Using screwdriver, remove two screws (L) and
8.
remove cap assembly (K).
Remove packing (M) from under lip of cap
9.
assembly (K). Throw packing away.
10. Using putty knife under plate (N), remove two
drive screws (P), flat washers (Q), and date (N).
Go on to Sheet 3
TA139412
6-44
