With the start switch in the ON position and the
engine NOT RUNNING, a reading in the first red zone
indicates dead batteries.
With the start switch in the ON position and the engine
NOT RUNNING, a reading in the black-and-white
striped zone indicates that the batteries are not fully
charged.
With the start switch in the ON position and the
engine NOT RUNNING, a reading in the first green
zone indicates the batteries are fully charged.
With the ENGINE RUNNING, a reading anywhere
below the second green zone (normal operating range)
indicates that the alternator is not producing enough
voltage to charge the batteries and supply current to
the electrical accessories.
With the ENGINE RUNNING, a reading in the second
red zone indicates that the alternator is overcharging.
With the ENGINE RUNNING, if the pointer registers in
the first green band, or either red bands, have the
problem corrected.
Fuel Level (7)—Indicates the approximate
quantity of fuel in the fuel tank.
NOTICE
To prevent the fuel from overheating when the
machine is operated in ambient temperatures above
38°C (100°F), the fuel level should be maintained
above one-half of a tank. Overheated fuel can cause
reduced power and possibly damage the fuel system.
NOTE: The fuel tank capacity is 341 L (90 U.S. gal).
Indicators
The indicators are color coded to indicate the
importance.
• Green—A green indicator means that the indicated
system is in operation.
• Orange—An orange indicator means to notice that
an automatically controlled system is operating.
• Red—A red indicator means to pay immediate
attention and correct the indicated problem
immediately.
Tension Fail (1)—Indicates low oil pressure in the
drive belt tension system.
Do not operate the machine when the tension fail
warning indicator is lit. Braking efficiency is
reduced if there is not enough drive belt tension.
Personal injury or damage to the machine can
occur if there is not enough braking capacity to
stop the machine.
Low Brake Pressure (2)—Indicates low oil
pressure in the brake system.
Do not operate the machine when the low brake
pressure warning indicator is lit. Braking
efficiency is reduced if there is not enough brake
system pressure. Personal injury or damage to the
machine can occur if there is not enough braking
capacity to stop the machine.
WARNING
!
WARNING
!
1
2
3
5
6
7
4
25
Operation Section
Monitoring Systems and Cab Features
TM5-2430-200-10
