12. Remove four bolts (17) with the washers from the
left rear corner of the cab.
13. Detach the insulation cover on the back of the cab
at seam (18).
13. Attach a hoist to upper cab (19). The weight of the
upper cab is approximately 431 kg (950 lb).
Improper lifting can allow the load to shift and
cause injury or damage.
25 mm (1 in) to allow the mounting pads in the
upper cab to clear guide pins (20) at the rear of
the cab platform. Once the cab has cleared the
guide pins, slowly move the cab forward until it
has cleared accelerator pedal (22), and then
remove it.
NOTE: Pay close attention when lifting the cab away
from the platform. Make sure that the cab does not
damage accelerator pedal (22), instrument console
(21), or the back of the operators seat.
21
22
20
WARNING
!
19
18
17
E-3
Appendix E
Unit Level Transportation Information
TM5-2430-200-10