6. Remove four bolts (9) with washers, and rifle
bracket (8).
7. Remove one nut (10) with the washers, and
disconnect ground cable (11) from the ground stud.
8. Loosen one screw (13), and disconnect
connecter (12).
NOTE: Screw (13) is located in the center of
connector (12).
9. Remove four bolts (14) with the washers from the
left front corner of the cab.
10. Remove four bolts (15) with the washers from the
right front corner of the cab.
11. Remove four bolts (16) with the washers from the
right rear corner of the cab.
16
15
14
12
13
10
11
9
8
E-2
Appendix E
Unit Level Transportation Information
TM5-2430-200-10
