TM 9-2350-222-20-14
BRAKE NIPPLE AND HOSE ASSEMBLY REPLACEMENT (Sheet 6 of 6)
14.
Thread cap (K) on tee (J) and tighten.
NOTE
Perform steps 15 and 16 out of vehicle.
15.
Thread nuts of hose assembly (L) on elbow (M)
finger tight.
16.
Using adjustable wrench to hold elbow (M) and
11/16 inch wrench on nut of hose assembly (L),
tighten nut.
17.
Position elbow (M) and nut of tube assembly (N)
and tighten nut finger tight,
18.
Using adjustable wrench to hold elbow (M) and
11/16 inch wrench on nut of tube assembly (N),
tighten nut.
19.
Thread nut of hose assembly (L) on tee (J)
finger tight.
20.
Using adjustable wrench to hold tee (J) and 11/16 inch wrench on nut of hose assembly (L),
tighten nut.
21.
22.
Install transmission shroud (page 9-23).
23.
Place shift lever in P (park) position and remove blocks from track.
End of Task
TA140366
13-59