TM 9-2350-222-20-1-4
BRAKE NIPPLE AND HOSE ASSEMBLY REPLACEMENT (Sheet 1 of 6)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
I
Installation
TOOLS: Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
11/ 16 in. socket with 1/2 in. drive
11/16 in. combination box and open end wrench
3/4 in. combination box and open end wrench
8 in. adjustable wrench
13/ 16 in. combination box and open end wrench
7/8 in. combination box and open end wrench
SUPPLIES: Rags (Item 65, Appendix D)
1/2 in. plastic plugs (5 required)
Dry cleaning solvent (Item 54, Appendix D)
Lockwasher (MS35338-46)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURES: Place shift lever in N (neutral) position (TM 9-2350-222-10)
Block tracks (TM 9-2350-222-10)
Remove transmission shroud (page 9-20)
NOTE
Some models have a quick-disconnect, refer to page 13-47.
NOTE
Clean all parts and general area prior to removal.
Go on to Sheet 2
TA140361
13-54
