ENGINE DISCONNECT LEAD ASSEMBLY REPLACEMENT (2D ENGINE) (Sheet 1 of 5)
2-1/2 in. socket with 1 in. drive
7/16 in. combination box and open end wrench
PRELIMINARY PROCEDURE: Remove right fuel tank (page 4-36)
1. Using spanner wrench, disconnect connectors
(A) from bulkhead.
Remove bottom cable to gain access to
engine disconnect lead assembly.
2. Using 2-1/2 inch socket, remove jamnuts (B)
one at a time pulling cables back as jamnuts
Go on to Sheet 2
All data on pages 5-81 thru 5-84 deleted.
Change 5 5-85