SMOKE GENERATOR TEE-TO-TURBOSUPERCHARGER TUBE ASSEMBLY REPLACEMENT
(Sheet 2 of 5)
Replacement of left or right tube assembly is similar, except
as noted. Replacement of right tube assembly is shown.
Use suitable container to catch any fuel leaks whenever any
fuel line connection is loosened or disconnected.
Using 7/16 inch wrench to hold nut (A) and socket on screw (B), remove screw (B), washer (C), and
nut (A) securing retaining straps (D), cushions (E), and clamps (F) and (G) if present (two places).
Remove two retaining straps (D), two cushions (E), and clamps (F) and (G), if present, from fuel
One clamp is used at inner position, two clamps at outer
position for right tube installation. No clamps are used on left
Go on to Sheet 3